QC INSPECTOR PIPING/WELDING

Name : KOHAT VIKAS
Industry Type : Engineers
City & State : SUART,GUJARAT
Job Title QC INSPECTOR PIPING/WELDING
Relocation Preferences :
Objective : My objective is to work with a dynamic company which will fully utilize my talents in following position with ultimate inclination in the capacity of QA\QC Inspector/Engineer. (Mechanical).
1.Scheduled and unscheduled Inspection.
2.Quality control and quality assurance.
Resume :  
CURRICULUM VITAE
KOHAT VIKAS.

871-RAMIPARK
DINDOLI VILLAGE
THALUKA SURAT CITY
SURAT-310806
(Gujarat) I N D I A
Contact No: 00919825964914.-INDIA
:00971503613684. -ABUDHABI
E-mail: vikaskohat_2[at]yahoo.com
vikaskohat[at]gmail.com
vikas1978[at]live.com

"My objective is to work with a dynamic company which will fully utilize my talents in following position with ultimate inclination in the capacity of QA\QC Inspector/Engineer. (Mechanical).
1.Scheduled and unscheduled Inspection.
2.Quality control and quality assurance.

TWI (THE WELDING INSTITUTE)
CSWIP 3.1 (TWI MIDDLE EAST, UAE DUBAI)-RESULT WAITING

ASNT QUALIFICATION (LEVEL II) in following, from Institute of Testing Technology, Mumbai.
1: ULTRASONIC TESTING (UT)
2: REDIOGRAPHIC TESTING (RT)
3: MAGNATIC PARTICAL TESTING (MPT)
4: DIPENITRATION TEST (DPT)

WORK EXPERIENCE

Total Work Experiences = 08 Years& 8Months

DESCON ENGINEERING, ABUDHABI -UAE

Position: QA/QC Engineer.
Period: Since, September 2008

Specific Duties and Responsibilities as QC Engineer in ABUDHABI MANUFACTURING UNIT GHAYATHI.

Obtain all relevant documentation or ensure access to it, like relevant specification, procedure, and welder test certificates, drawings.
Ensure welder Qualification, correct materials, consumables, equipments & correct preheat.
Assess/measure fit-up like root face, bevel angle, root gap, alignment, joint cleanness.
Ensure no under stress is applied to the joint & correct environment.
Check amperage, voltage, and polarity.
Ensure adequate cleaning between passes, interpass temp.
Ensure weld is post cleaned, visual inspection of weld defects.
Inspect post heat treatment & check NDT reports.


BOROUGE ETHYLENE CRACKER EU-2 PROJECT, TRIM 2.
GASCO- ELIXIER-LINDE CONSRUCTION OF AIR SEPARATION PLANT,
AMW-1912-PR-PFE-02-08-RUWAIS.

Duties and Responsibilities.
Inspection of prefabricated spools received from DESCON Abu Dhabi manufacturing unit as per Isometric; P&ID and project specification (LS 145-10&LS145-20) also errection Inspection as per procedure for Piping Fabrication & Installation as well as inspection and Testing plan for fabrication and Installation of piping for ELIXIER joint venture of GASCO & LINDE.
Visual Inspection of fit up & welding as well as punch listing of Test Pack and witness hydro testing with LINDE QA/QC Inspector/Engineers.

ADGAS- TECHNIP-Descon (Offshore Associated Gas-Package 1) PROJECT DAS ISLAND (UAE)

Duties and Responsibilities as Welding Inspector
Monitor welder performance and conduct visual inspections of welds and repairs of welds in accordance with company procedure and international codes of practice.
Check, inspect and test incoming welding and construction materials to ensure they meet project specification requirements.
Monitor construction process from all aspects to ensure performance meets job quality in accordance with company procedure and international standard.
Coordinate with clients to undertake Procedure Qualification Test (PQT) and inspect of prepared test specimen and witness destructive test.
Identify Welding Procedure Specification (WPS) and PQR for job as per project specification and verify Welders meet PQR requirements.
Collate all relevant documentation for the job and apply for the data to the creation of a Test Pack to undertake pre-hydro test inspection activity.
Undertake verification of welding machine to ensure equipment meets job requirement specification and provide verification of electrode baking and holding temperature including control and issue.
To conduct fit up and dimension inspection as per inspection and test plan (ITP) and provide technical guidance for welding sequence and distortion control.
Survey erection, construction and equipment /piping for alignment and plumb ness in accordance with drawing and specification.
Prepare punch list and verify all items are in place and act as an agent for the company during punch list activity.

CCC /SNAMPROGETTI KPF PROJECT SAUDI ARAMCO- KSA
(Gas Oil and Water Separation Plant KPF Project, Khursaniyah)
Position: QA/QC Piping Inspector
Period: May- 2007-July 2008
Approved QA/QC Piping Inspector by SAUDI ARAMCO Northern Area Project Division, Khursaniyah Project Inspection Section having SAP Number 70008051
Duties and Responsibilities as Piping Inspector

Ensuring quality control site surveillance.
Attending inspection and test according approved inspection and test plan (ITP).
Continually inspect the work/quality in addition to the mentioned in the ITP, monitor timely submission of request for inspection (RFI) to Saudi Armco Produced by the sub-contract.
Ensure the proper disposition of non-conformities
Identify to the site quality control coordinator any related concerns or deviation
Visual Inspection & Material verification of Manual Valves such as Gate Valve, Globe Valve, Butterfly, Check, Ball Valves etc, with mill test certificates.
Field Hydrostatic Testing of valves body and seat prior to installation
Visual inspection & Material verification of Pipes fittings, gaskets, Flange, bolts including material tractability.
Final Inspection of completed pipe laying spools, erection & assembly/piping flange joints
Coordinate with NDT personnel for RT, UT, MT and PT required by the project
Responsible in training junior Quality Control Inspectors.
Visual Inspection of shop fabricated pipe spools & supports.

M/S. HINDUSTAN PETROLIUM CORPORATION LTD (Mumbai)
Position: QA/QC Inspection Engineer (PIPING)
Period: 1 Year
Duties and Responsibilities as Inspection Engineer.
Test Pack Punch list and hydro testing supervision.
Visual inspection & Material verification of Pipes fittings, gaskets, Flange, bolts including material tractability.
Final Inspection of completed pipe laying spools, erection & assembly/piping flange joints.

M/S. RELIANCE INDUSTRIES LTD. PATALGANGA, (Mumbai)
Position:Inspection Engineer (Piping & Equipments)
Period: 1 Year
Duties and Responsibilities as Inspection Engineer
As an Inspection Engineer for all Plants (Job Involves scheduled and unscheduled Inspection of Static Equipments like Heat exchanger, reactors, vessels, columns, filters) In Mechanical Department, Central Engineering Services (CES INSPECTION).
Also attended shutdown of 1-month duration of LAB plant &2 Months duration of PTA Plant, Patlganga, Mumbai.

M/s. W.P. ENGINEERING WORKS (Mumbai)
(Manufacturer of refinery and chemical plant process equipment)
Position:Quality Control and Inspection Engineer
Period: 11 Months.
Duties and Responsibilities as Inspection Engineer.
Job involves managing and handling third party inspection like, M/s. BVIS, M/s. Signate, M/s. Backs Counsel, and M/s. Gharada Chemicals etc as well as coordinating job are manufacturing.

M/s. SUPERFLO FILTER PVT. LTD (Mumbai)
(Designer and Manufacturer of Industrial Filters.)
Position:Quality Control and Inspection Engineer
Period: 10 Months.
Duties and Responsibilities as Inspection Engineer.
Job involves managing and handling third party inspection like, M/s. BVIS, M/s. Signets, M/s. Backs Counsel, M/s. Gharada Chemicals etc, as well as job coordinator.

M/S. NEW FIELD ENGINEERING COMPANY,
Mumbai 400 063
Designer and Manufacturer of refinery and chemical special purpose Equipments like Ejectors (Steam jet, Water jet, Air jet), Heat exchanger and Reactors.
Position:Quality Control and Inspection Engineer
Period: 3 Years & 6 Months

EDUCATIONAL QUALIFICATION: -

Diploma in Mechanical Engineering from BOARD OF Technical Education, Mumbai. In May -2000, from Government Polytechnic Sakoli.Dist- Bhandara, Maharashtra(INDIA).

COMPUTER QUALIFICATION: -

1Diploma in Office Automation: - There by covering
2 Computer fundamental,
3Windows, Words 2000,
4 MS Excel 2000,
5 MS Power- point 2000
6Auto-CAD 2000.

PERSONAL INFORMATION: -

1Name: - Kohat Vikas Baburao
2Fathers Name: - Kohat Baburao Gajanan.
3Date of Birth: - 1 st December 1978.
4Nationality: - Indian.
5Contact No: - 00919825964914-INDIA
00971503613684-Abu Dhabi
6Passport No: - F 5350391
7Motor Driving Licence No: - B 9726
8Permanent Account No: - AOBPK9205J
9E-mail ID- vikaskohat_2[at]yahoo.com
vikaskohat[at]gmail.com
vikas1978[at]live.com
10Language Known: - English, Hindi, Marathi, Gujarathi.


OTHER INFORMATION: -
Project Title: - Wire Drawing Machine
Training; - M/S.Bajaj Plastic Industries Wadi, Nagpur
Faculty :- M/S. COMP-U-TECH Auto-CAD-2000.


Copyright 2013. All Rights Reserved.





View Resumes: mechanical engineer resume, electrical engineer resume, architect resume, construction resumes