Electrical Installer

Name : Charles Neff
Industry Type : Electrical Contractors
City & State : Riverside,CA
Job Title Electrical Installer
Relocation Preferences : CA
Objective : I am interested in a long-term full time position, working for a well established company in the Electrical industries: premises or non-premises areas, that provides compensation, benefits, security, and growth potential both in the field and financial. With my education, experience, and ability to learn new areas of the industry, I can be the ideal person for the position.
Resume :  
I have a back ground in Electrical, Electronics, Construction, and some HVAC, with years of working experience to offer. I currently have an A.S. Degree in EET from ITT Technical Institute, a Diploma and CET card from S.C.I.T.s State Approved General Electric Program, and I also have some Certified accredited training hours at JATC. I currently have both a State Certification Card in Fire & Life Safety #123223, and a State Electrical Certification Card #T12203. I have construction experience including commercial, industrial, and residential both rough-in and finish premises, with structured wiring experience, and familiar with NEC, NFPA, and some IBC codes. I currently have knowledge in carpentry, footings, foundations, structural, roofing, site & plot plans, full sets of prints, load calculations sheets, along with panel schedule layout, breaker sizing, load balancing, branch circuit conductor sizing, and rough-in & finish of electrical circuits to meet Code Requirements. Some of the other field related work experiences are, Fire & Life Safety, other Low-Voltage Systems, Industrial Controls & PLCs, and circuit trouble-shooting experience to offer. I also have some residential and commercial HVAC install cut-in & add-on experience, and went to ROP Training for it.

One of the last jobs that Ive had the opportunity to work on was a Retro-High-Rise build located in Downtown LA. The building was a hotel called the Alexandria Hotel built back in the early 1900s when code enforcement required fire proofing of rooms. It was fitted with a hard wired panel some years back, with no monitoring company, with multiple elevator recall issues, along with tank filling problems it wasnt reporting to the panel and was dry. Along with area coverage issues, the pump was also not functioning. It was approximately a 2 year project, and was upgraded to a addressable Silent Knight System to meet the code requirements.

ELECTRICAL KNOWLWDGE IN: the electrical field for residential, commercial, and industrial area. AC/DC circuits, NEC code, NFPA code, power distribution, motor control, code application, logic control, ladder diagrams, PLCs, wiring circuits, electrical blueprints for residential, commercial, & industrial. Also performing electrical installations including bending conduit, roughing & finish in electrical circuits, switches, fixtures, panels & sub-panels, etc., electronics, solid-state electronics, integrated circuits, digital electronics, communications, microcomputer principles, microprocessors & industrial control applications, schematics, technical mathematics, technical writing, oscilloscopes, frequency generators, DMMs, power supplies, probes, and various other test equipment & tools.

One of my last jobs of 5 years was, foreman/Installer, for Glendale Fire Systems. Responsibilities included:
Install, trouble-shoot, & maintain, Fire, Security, Nurse-Call, Gas Detection, ANSIL, Reg. 4, Voice/TV/Data, Structured Wiring, and some Camera & Entry Systems.
High-Rise, Decks, Tilt-Ups, Conventional, Hospitals, Schools, Shopping Centers, Restaurants, Residential, Apartment, and other Commercial Installs, meeting code requirements.
Coordinate with other trades, layout, delegation of job duties, reports, inspections, and safety.
Reading blue prints, schematics, some program changes, trouble-shooting, installing devices, bending pipe, pulling circuits, wire termination, and general construction.
Familiar with NEC, NFPA, IBC, Silent Knight, EST (Miratone), Firelight, Gentex, Amseco, and various other manufactures of equipment.

EDUCATION
A.S. Degree in EET, from ITT Technical Institute.
California State Certified, as an Fire & Life Safety Technician J.W., Cert. #123223.
CET card and Diploma from S.C.I.T.s State Approved Electrical Program, Cert. #T12203.
RCC Construction Technology Program, knowledge in Framing Carpentry, Structural, Footings, Foundations, Blueprints, Site & Plot plans, Materials, Plumbing Codes, Electrical Codes, IBC Codes, Soil Technology, Mechanical Codes, State Accessibility, Engineering, and Energy Standards.
Accredited Training hours at JATC.
Familiar with NEC, NFPA, and some IBC codes.
Some ROP HVACR Training.

EXPERIENCE
2003-2008 Foreman/Installer, Glendale Fire Systems.
Install, trouble-shoot, & maintain, Fire, Security, Nurse-Call, Gas Detection, ANSIL, Reg. 4, Voice/TV/Data, Structured Wiring, and some Camera & Entry Systems.
High-Rise, Decks, Tilt-Ups, Conventional, Hospitals, Schools, Shopping Centers, Restaurants, Residential, Apartment, and other Commercial Installs, Meeting code requirements.
With other trades, layout, delegation of job duties, reports, inspections, and safety.
Reading blue prints, schematics, some program changes, trouble-shooting, installing devices, bending conduit, pulling circuits, wire termination, and general construction.
Familiar with NEC, NFPA, IBC, Silent Knight, EST (Miratone), Firelite, Gentex, Amseco, and various other manufactures of equipment.

2001-2002 Associate Technical Representative, Simplex/Grinnell.
Service, install, trouble-shoot, & maintain, Fire, Time Recorder, & Clock Systems, commercial use.
Isolate, & repair trouble-conditions, Reg. 4 testing, and repair for code requirements.
Reading blueprints, schematics, program changes, trouble-shooting, installing devices, & maintenance.
Familiar with Simplex panels, & programming information, Radionics, Silent Knight, Napco, NFPA, Pace Certification, and other equipment manufactures.

2000-2001 Telecom. Technician/Installer, Integrated Technology.
Install, move, and add, Structured Voice/Data Systems, Commercial use.
Pulling & terminating fiber, Cat-1,2,3,& 5, T-1, Twin axial, 200, 100, 50, 25 pair plenum & non-plenum, icky pick, MPP/CMP, MPR/CMR, 568A and 568B structured cable.
Reading blueprints, cross-connecting, terminating, stand-offs, and installing equipment.
Certifications for Hitachi & WireScpoe 350, all in accordance with TSB-67 & 95, Bisci, and ANSI/ICEA/TIA/EIA.
Rolm, Nortel, Meridian, Seimonds, AMP, Leviton, Caddy, Beldon, Hitachi, HP, 3-Com, WireMold, and other equipment Manufactures.

1999-2000 Alarm/Telecommunication Technician/Installer, Electronics Systems Technology.
Install, maintain, and trouble-shoot, Fire/Life Safety Systems, Telemetry, Structured Cable, Nurse-Call, and commercial and medical use.
Reg. 4 testing, installs, repairs for code requirements, medical telemetry, pulling and terminating Cat-5/RG-6 & 59, Structured Systems, installing patch panels, and racks.
Reading blueprints, schematics, trouble-shooting, installations, pulling circuits, and bending conduit.
Marquette, Tel-Tron, Simplex, Silent Knight, Radionics, Napco, Lucent, NFPA, Bisci, and WireMold.

1998-1999 Service Technician, Xerox/Fax City.
Service, maintain, install, and sell Xerox, Muratec fax machines and supplies.
Service manuals, schematics, trouble-shooting, replacing oversupplies, and PC boards, renewing service agreements, and routine preventative maintenance on equipment.
Weekly sale/training meetings, cold-calling, customer support, inside and outside sales, proposals, and daily service logs.

1997-1998 Technician, South Coast Controls.
Pre-wire control panels for automated and industrial controlled machines.
Reading blueprints, schematics, ladder logic diagrams, and production schedules.
PLCs, wiring controls, trouble-shooting, fabrication, testing, & wire harness fabrication.
Allen Bradley, Toshiba, GE, Sprecher & Shun, and other automated control devices.

1996-1997 Technician, Comtec.
Repaired and Calibrated drives using DriveProbe diagnostic software.
Trouble-shooting, diagnosing, adjustments, and repairing, or replacing faulty components.
Data entry, and weekly production schedules.
Toshiba, and Fujitsu equipment.

1995-1996 Installer/Satellite-Sound Technician, California Communication Services.
Install audio, video satellite and sound systems, for commercial use, Restaurants, Bars, etc.
Reading blueprints, trouble-shooting, horizontal and vertical positioning, mounting speakers, volume controls, microphones, and music-on-hold.
Pulling and terminating RG-6 & 59, other low-voltage cables assemblies.
DMX, Muzak, Dish-Network, TOA, Bose, Bogen, Caddy, and other equipment.

1992-1995 Leadman/Assembly Person, Watlow-AOV.
Manufacture of high temp. silcon rubber heaters, aerospace, manufacturing, & commercial use.
Reading blueprints, trouble-shooting, production schedules, purchasing, training, team meetings, wire assembly, and heavy machinery use.

1991-1992 Installer, West Coast Energy.
Install HVAC systems, residential and commercial use.
Cut-ins & add-ons, flexable, exposed, insulated, and non-insulated ducting, sheet-metal fabrication, horizontal & vertical furnace applications, heat pumps, pulling high-voltage & low-voltage cables, bending conduit, building decks, plenum fabrication, and equipment installs.
Reem & Rude, Carrier, Payne, Honeywell, and other equipment manufactures.

1990-1991 Warehouse/Driver, VSM Supply Co.
Warehouse person, and Driver for a HVAC Supply Company.
Fill orders, will-call, counter, and delivery, inventory, fork-lift, load trucks, deliver to site or shop.

1989-1990 Laborer/Helper, Wehner Construction.
Cut-off saw helper, pulling temps, pick-up assistant, dropping off materials, and clean-up.
Residential track homes.

COMPUTER SKILLS
Windows 3.1/95/98/XP/Vista, Internet, DOS, MicrologixPro, and some C++, Basic, Office 4.3 Pro, Act, Works, Networking and Hardware.

Copyright 2013. All Rights Reserved.





View Resumes: mechanical engineer resume, electrical engineer resume, architect resume, construction resumes